This is a kind of flowchart. Each stage is illustrated and described.:-

• In the larger top box draw a simple sketch of the process.

• In the lower box explain what is happening, include the tools and machines or special techniques used.

• Add a time for each stage somewhere in each box ( times should be 30 minutes, 1 hour and upwards)

For example:-

First Stage (This is the first Quality Check Stage as well)

• The top box could show a sketch of a steel rule being used to check measurements.
• The lower box would describe this - Checking measurements of materials using a steel rule.
• Time 30 minutes

Second stage

• The top box could could show a sketch of the wood marked out.
• The lower box would describe this - Marking out the finger joints using a marking gauge, steel rule, pencil and a marking knife.
• Time 1 hour

Continue filling in as many stages as possible. Add in quality check stages where possible!