To mark out in wood you would use ?

1.   ?    pencil
2.   ?    scriber
3.   ?    felt tip pen
   

To mark out at right angles, an engineers square would be used on which material?

1.   ?    Wood
2.   ?     Metal
3.   ?     Plastics

To mark out parallel to an edge, a marking gauge would be used on which material?

1.   ?    Plastic
   
2.   ?    Wood
   
3.   ?    Metal
   

To mark out irregular shapes in material you would use a template for?

1.   ?    Metal
2.   ?     Wood
3.   ?     Plastic

To hold plastic securely whilst working on it you would use a ?

1.   ?    Metalwork vice
   
2.   ?    Woodwork vice
3.   ?    G-cramp
   

To cut straight lines in wood you wood use ?

1.   ?    Tenon saw
2.   ?    Coping saw
   
3.   ?     Hacksaw
   

To cut a curve in metal you would use a ?

1.   ?    Abra file
   
2.   ?    Tin snips
   
3.   ?    Coping saw
   

To trim small amounts of excess material off of plastic, you would use?

1.   ?    Smoothing Plane
2.   ?    Sanding machine
3.   ?    Hand file

For cutting a slot or housing in wood you would use a?

1.   ?    Tenon saw and then remove waste with a chisel
2.   ?    Milling machine
   

To bend plastic you would use a ?

1.   ?    Folding bars and a mallet
2.   ?    A Strip Heater
3.   ?    Vaccuum former