D&T Res. Mat. Medium Term Plan: Module 1: - Jewellery Box
Module 1: Project – Jewellery Box |
||||||
Sequence of Lessons |
Theme/Aims |
Key Activities |
Resources |
Student Outcomes |
Assessment Opportunities |
Key Vocabulary |
1 |
Introduction to the course and first project |
Design brief. Looking at materials and exemplars |
Range of materials Exemplar boxes and joints |
Understanding of project. Types of materials and joints – properties. |
Research followed by test. |
Names of joints and material types. |
2 |
Marking out. Accuracy. Use of jigs |
Demonstrate marking out joints |
Marking out tools. Timber. |
Marking out comb joints |
Initial ideas drawings |
Names of tools |
3 |
Use of specialised tools. |
Use of the rebate plane. Cutting joints. |
Rebate plane |
Cutting joints. |
Quality of marking out - accuracy |
Jigs and rebates. |
4 |
Full practical session |
Cutting joints accurately. |
Workshop tools and exemplars |
Cutting comb and rebate joints |
Quality of marking out - accuracy |
Tools |
5 |
Manufacturing in quantity |
Demonstrations of production techniques. |
Routers and jigs. Band saw jigs. Exemplar joints. |
Understanding of batch production and jigs |
Design work. Test on manufacturing. |
Manufacturing terms |
6 |
Full practical sessions continue - Use of adhesives. |
Demonstrate and discuss adhesives and their application. |
Clamps. Adhesives |
Glue up boxes. |
Design work. Quiz on adhesives. Plan of production |
Adhesive names. Clamping devices. |
7 |
Sanding and finishing. |
Demonstrate use of fillers and abrasives |
Abrasive papers and fillers |
Fill gaps and sand - going through the grades. |
Research on fixings and fastenings finishes. Design work. Quality of finish. |
Abrasives. |
8 |
Fixings and fastenings |
Cutting box and attaching hinges, handles etc. |
Bandsaw. Hinges handles. Exemplars. |
Attaching hinges handles and general cleaning up. |
Market research on finishes. Design work. Quality of finish. |
Fixings and fastenings |
9 |
Finishing |
Demonstrate range of finishes |
Finishing materials. |
Applying final finishes. Market research on finishes. |
Final design drawings |
Finishes. |
10 |
Final display of completed boxes. |
Final finishing and fitting out. |
Workshop equipment. |
The finished box, |
Final assessment of the artefact. Final test. |
Evaluation. |